The QUANTUM NARGESA MX700 Hydraulic Ironworker (Punching Machine) is widely-known for its extensive versatility. This unit can perform numerous working functions, such as punching materials (like sheet metal, flat bar, tube, angle, U profile, T profile, UPN, IPN, etc..) Bending, Cutting, Inlaying, Tube Notching, Embossing, and it doesn’t end there. The MX700 can be adapted to be used with tooling of any kind, even tooling that is made by you, the customer. If you’re looking for a versatile, efficient and easy to use workhorse, then the MX700 is an essential piece of equipment for your metalworking shop floor.
WATCH THE VIDEO TO SEE EXACTLY HOW THE NARGESA MX700: 70 TON IRONWORKER WORKS ALONG WITH SOME OF IT’S FEATURES
MAJOR ADVANTAGE OF THE MX SERIES IRONWORKERS:
Our MX Series Ironworkers stand out in many ways, but they are literally like no other Ironworker on the market, because of it's displacement and the wide working table that allows you to fit all kind of tooling. It isn't uncommon for our customers to make their own tooling, since it is so easy to adapt their custom tooling to the MX700.
Its versatility and features makes it a fast payback machine. It carries out the same functions of 5 different machines.
All Nargesa Hydraulic Ironworkers are equipped with Nargesa’s punching tool base that includes the fitting nut for punches and the base holder for dies. All punches and dies are are optional, which allows each customer to equip their ironworker as desired.
TECHNICAL SPECS AND FEATURES
- Hydraulic Power: 70 Tons
- Working Speed: 0.35” Per Second
- Return Speed: 0.55” Per Second
- Tooling Support Table: 23.6” x 13.7”
- Motor Power: 7.5 HP / 5.5 kW
- Machine Dimensions: 37” x 52” x 82”
- Machine Weight: 4,400 lbs.
- Warranty: 3 Years (On any defective parts.)
- Extremely Fast Tooling Changeover: 30 Seconds Max.
- The Displacement Adjustment allows for an increase in productivity.
- There is no maximum dimension for punching.
- Palletized Base to easily move the MX700 around.
- Swinging front safety protection.
- Start/Activation with safety pedal.
- Digital display.
- Parts and strokes counter.
- Alarm diagnosis.
TECHNICAL SPECS AND FEATURES
All Nargesa Hydraulic Ironworkers are equipped with Nargesa’s punching tool base that includes the fitting nut for punches and the base holder for dies. All punches and dies are are optional, which allows each customer to equip their ironworker as desired.
- Gooseneck (Neck): 13.7”
- Max. Height.: 15.3”
- Hydraulic Power: 70 Tons
- Working Speed: 0.35” Per Second
- Return Speed: 0.55” Per Second
- Tooling Support Table: 23.6” x 13.7”
- Motor Power: 7.5 HP / 5.5 kW
- Machine Dimensions: 37” x 52” x 82”
- Machine Weight: 4,400 lbs.
- Warranty: 3 Years (On any defective parts.)
- Extremely Fast Tooling Changeover: 30 Seconds Max.
- The Displacement Adjustment allows for an increase in productivity.
- There is no maximum dimension for punching.
- Palletized Base to easily move the MX700 around.
- Swinging front safety protection.
- Start/Activation with safety pedal.
- Digital display.
- Parts and strokes counter.
- Alarm diagnosis.
PUNCHES
AND DIES
PUNCHES AND DIES
ONE ROUND PUNCH AND ONE DIE FROM 0.120"Ø to 1.10"Ø ARE INCLUDED
(FOR A COMPLETE LIST OF ALL PUNCH AND DIES, CONTACT YOUR SALES ENGINEER.)
All Nargesa Hydraulic Ironworkers are equipped with one set of round punch and die to the customer’s choice from 0.120" to 1.10" (3 to 28mm). The rest of the dies are optional (at an additional cost), which means each customer equips his machine as desired.
MX700 Punching Thickness Specs (CAPACITIES):
| MX700 Thickness Specs #1 | MX700 Thickness Specs #2 | MX700 Thickness Specs #3 | MX700 Thickness Specs #4 |
| Material Thickness: 1.0” Thick | Material Thickness: 0.39” Thick | Material Thickness: 0.31” Thick | Material Thickness: 0.19” Thick |
OPTIONAL ACCESSORIES
MX700 Thickness Specs #1
Material Thickness: 1.0” Thick
Round Punch: 1.0” Diameter
Square Punch: 0.75”x0.75”
MX700 Thickness Specs #2
Material Thickness: 0.39” Thick
Round Punch: 2.30” Diameter
Square Punch: 1.85”x1.85”
MX700 Thickness Specs #3
Material Thickness: 0.31” Thick
Round Punch: 2.75” Diameter
Square Punch: 2.15”x2.15”
MX700 Thickness Specs #4
Material Thickness: 0.19” Thick
Round Punch: 3.90” Diameter
Square Punch: 2.75”x2.75”
OPTIONAL
ACCESSORIES
Round Punches and Dies, Square Punches, Oval Punches & Rectangular Punches
Nargesa offers a very large catalog of punches and dies of all kinds for the Ironworkers.
(Contact a Sales Engineer for more information.)
(Contact a Sales Engineer for more information.)
Tooling to Round Off Corners
Nargesa offers a very large catalog of punches and dies of all kinds for the Ironworkers.
(Contact a Sales Engineer for more information.)
(Contact a Sales Engineer for more information.)
Tooling to Round the Ends of Flat Bars
Nargesa offers a large catalog of punches and dies for Rounding Off the ends of Flat Bar Applications.
(Contact a Sales Engineer for more information.)
(Contact a Sales Engineer for more information.)
Round Tube Notching Tooling
Nargesa offers round tube / pipe notching tooling from 0.63” x 2.3” in diameter (16 to 60mm in diameter).
(Contact a Sales Engineer for more information.)
(Contact a Sales Engineer for more information.)
Flattening Extractor (REF: 140-02-02-00042)
Extractor that flattens flat bars while punching so they cannot be distorted/deformed during that process.
Max. Thickness for Flat Bar/Solid Bar: 0.59” (15mm)
(Accessory Weight: 33 lbs.)
Max. Thickness for Flat Bar/Solid Bar: 0.59” (15mm)
(Accessory Weight: 33 lbs.)
90º Adjustable Angle Stripper Tooling - 5.9"x5.9" Max. Cutting Capacity (REF: 140-02-02-00001)
Sheet stripping tooling for angle etc. - adjustable up to 5.9”x5.9” (150x150mm) to a fixed 90º.
Max. Cutting Capacity: 5.9”x5.9”x0.315” (150x150x8mm)
(Accessory Weight: 84 lbs.)
(Accessory Weight: 84 lbs.)
Angle Cutting Tool (REF: 140-02-02-00036)
Tooling to cut angle to 90º and 45º.
Max. Straight Cutting Capacity: 3.15” x 3.15” (80x80mm)
Max. Mitered Cutting Capacity: 1.9” x 1.9” (50x50mm)
(Accessory Weight: 71 lbs.)
Max. Mitered Cutting Capacity: 1.9” x 1.9” (50x50mm)
(Accessory Weight: 71 lbs.)
Folding Tooling up to 3.9" (REF: 140-02-02-00033)
Tooling to fold steel sheet and flat bar up to 3.9” (100mm). 88º Punch. Die with 2.2” (56mm) and 1” (26mm) V's.
Max. Folding Length: 3.9” (100mm)
Max. Thickness: 0.315” to 0.47” (8 to 12mm)
(Accessory Weight: 20 lbs.)
Max. Folding Length: 3.9” (100mm)
Max. Thickness: 0.315” to 0.47” (8 to 12mm)
(Accessory Weight: 20 lbs.)
Folding Tooling up to 6.6" (REF: 140-02-02-00034)
Tooling to fold steel sheet and flat bar up to 6.6” (170mm). 88º Punch. Die with 2.2” (56mm) and 1” (26mm) V's.
Max. Folding Length: 6.6” (170mm)
Max. Thickness: 0.315” to 0.47” (8 to 12mm)
(Accessory Weight: 29 lbs.)
Max. Folding Length: 6.6” (170mm)
Max. Thickness: 0.315” to 0.47” (8 to 12mm)
(Accessory Weight: 29 lbs.)
Folding Tooling up to 13.7" (REF: 140-02-02-00043)
Tooling to fold steel sheet and flat bar up to 6.6” (170mm). 88º Punch. Die with adjustable V of 0.63” (16mm), 1.57” (40mm), 3.15” (80mm) and 4.7” (120mm).
Max. Folding Length: 13.7” (350mm)
Max. Thickness: 0.78” (20mm)
(Accessory Weight: 100 lbs.)
Max. Folding Length: 13.7” (350mm)
Max. Thickness: 0.78” (20mm)
(Accessory Weight: 100 lbs.)
Tooling Holder for Punching Angle and U-Profiles (REF: 140-02-01-00031)
Tooling holder to punch angles and U Profiles. Separate, Exchangeable punches and dies (not included with base) of different sizes are needed to make punches.
Min. Hole Diameter: 0.078” (2mm)
Max. Hole Diameter: 1.1” (28mm)
(Accessory Weight: 15 lbs.)
Max. Hole Diameter: 1.1” (28mm)
(Accessory Weight: 15 lbs.)
Tooling to Cut Flat Bar up to 3.9" x 0.47" (REF: 140-02-02-00037)
Tooling to cut sheet metal or flat bar from 0.0315” up to 0.39” thickness (0.8mm up to 10mm thickness).
Max. Cutting Capacity: 3.9”x0.47” (100x12mm)
(Accessory Weight: 64 lbs.)
Max. Cutting Capacity: 3.9”x0.47” (100x12mm)
(Accessory Weight: 64 lbs.)
Tooling to Cut Flat Bar up to 7.8" x 0.78" (REF: 140-02-02-00002)
Tooling to cut sheet metal or flat bar from 0.0315” up to 0.78” thickness (0.8mm up to 20mm thickness).
Max. Cutting Capacity: 7.8”x0.78” (200x20mm)
(Accessory Weight: 120 lbs.)
Max. Cutting Capacity: 7.8”x0.78” (200x20mm)
(Accessory Weight: 120 lbs.)
Tooling to Cut Round Bar up to 1.37" (REF: 140-02-02-00038)
Tooling to cut round solid bar from 0.118” up to 1.37” (3mm up to 35mm).
Min. Cutting Diameter: 0.118” (3mm)
Max. Cutting Diameter: 1.37” (35mm)
(Accessory Weight: 35 lbs.)
Min. Cutting Diameter: 0.118” (3mm)
Max. Cutting Diameter: 1.37” (35mm)
(Accessory Weight: 35 lbs.)
Tooling to Make "Arrows" out of Sheet Metal (REF: 140-02-02-00041)
Tooling to punch sheet metal steel in the shape of an arrow for fencing.
Max. Sheet Thickness: 0.118” (3mm)
(Accessory Weight: 50 lbs.)
Max. Sheet Thickness: 0.118” (3mm)
(Accessory Weight: 50 lbs.)
Tooling to Make "Arrows" out of Round Tubes (REF: 140-02-02-00040)
Tooling to flatten and cut Round Tube into the shape of an arrow for different ornamental applications. Can suit different diameters within capacity.
Min. Round Tube Size: 0.39”x0.07” (10x2mm)
Max. Round Tube Size: 1.18”x0.07” (30x2mm)
(Accessory Weight: 44 lbs.)
Min. Round Tube Size: 0.39”x0.07” (10x2mm)
Max. Round Tube Size: 1.18”x0.07” (30x2mm)
(Accessory Weight: 44 lbs.)
Tooling to Make "Fence Ends/Tops" out of Round Tubes (REF: 140-02-02-00039)
Tooling to flatten and cut Round Tube for fencing. Can suit different diameters within capacity. Also able to punch different diameter holes within capacity.
Min. Round Tube Size: 0.39” (10mm)
Max. Round Tube Size: 1.96” (50mm)
(Accessory Weight: 53 lbs.)
Min. Round Tube Size: 0.39” (10mm)
Max. Round Tube Size: 1.96” (50mm)
(Accessory Weight: 53 lbs.)
Punch and Die Tooling for Locks (REF: 140-02-01-00036)
Punch and die to make locks holes in metal sheet. (In order to use this tooling, 2 more optional separate accessories are required: CAB60 and TAP40.)
Max. Thickness: 0.23” (6mm)
(Accessory Weight: 3 lbs.)
Max. Thickness: 0.23” (6mm)
(Accessory Weight: 3 lbs.)
Tooling to Make "Grill Ventilation" (REF: 140-02-02-00031)
Tooling to make ventilation grill in sheet metal. With adjustable punching operations since they're made one by one.
Max. Punching Size: 3.9”x0.78” (100x20mm)
Max. Thickness: 0.078” (2mm)
(Accessory Weight: 47 lbs.)
Max. Punching Size: 3.9”x0.78” (100x20mm)
Max. Thickness: 0.078” (2mm)
(Accessory Weight: 47 lbs.)
Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes (REF: 140-02-02-00045)
Set of die holders that are to be adapted for cutting and shaping tools for decorative / ornamental flower elements.
(Accessory Weight: 128 lbs.)
(Accessory Weight: 128 lbs.)
Flower Cutting Die D65 "with 8 Petals" (REF: 140-02-01-00043)
Die for cutting 8 petal flowers out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required. For other designs (including custom designs), consult with your sales engineer.
Flower Diameter: 2.55” (65mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118”
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Flower Diameter: 2.55” (65mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118”
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Flower Cold Stamping Tooling "with 8 Petals" (REF: 140-02-01-00044)
Die for cold stamping / molding 8 petal flower design out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required, as well as the cutting die (item no. 140-02-01-00043). For other designs (including custom designs), consult with your sales engineer.
Flower Diameter: 2.55” (65mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118”
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 11 lbs.)
Flower Diameter: 2.55” (65mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118”
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 11 lbs.)
Flower Cutting Die D85 "with 5 Petals" (REF: 140-02-01-00045)
Die for cutting 5 petal flowers out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required. For other designs (including custom designs), consult with your sales engineer.
Flower Diameter: 3.3” (85mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”
Cutting Thicknesses in mm: 1, 1.5, 2mm
(Accessory Weight: 23 lbs.)
Flower Diameter: 3.3” (85mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”
Cutting Thicknesses in mm: 1, 1.5, 2mm
(Accessory Weight: 23 lbs.)
Flower Cold Stamping Tooling "with 5 Petals" (REF: 140-02-01-00046)
Die for cold stamping / molding 5 petal flower design out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required, as well as the cutting die (item no. 140-02-01-00045). For other designs (including custom designs), consult with your sales engineer.
Flower Diameter: 3.3” (85mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”
Cutting Thicknesses in mm: 1, 1.5, 2mm
(Accessory Weight: 14 lbs.)
Flower Diameter: 3.3” (85mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”
Cutting Thicknesses in mm: 1, 1.5, 2mm
(Accessory Weight: 14 lbs.)
Leaf Cutting Die 4.25"x1.65" (REF: 140-02-01-00047)
Die for cutting decorative leaves out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required. For other designs (including custom designs), consult with your sales engineer.
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Leaf (Left) Cold Stamping Tooling 4.25"x1.65" (REF: 140-02-01-00048)
Die for cold stamping / molding left facing decorative leaf design out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required, as well as the cutting die (item no. 140-02-01-00047). For other designs (including custom designs), consult with your sales engineer.
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Leaf (Right) Cold Stamping Tooling 4.25"x1.65" (REF: 140-02-01-00049)
Die for cold stamping / molding left facing decorative leaf design out of sheet metal. In order to use this die, accessory “Set of Cutting and Shaping Die Holders for Decorative Flower & Leaf Shapes” (item no. 140-02-01-00042) is required, as well as the cutting die (item no. 140-02-01-00047). For other designs (including custom designs), consult with your sales engineer.
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Leaf Size: 4.25”x1.65" (108x42mm)
Cutting Thicknesses in inches: 0.039”, 0.059”, 0.078”, 0.118"
Cutting Thicknesses in mm: 1, 1.5, 2, 3mm
(Accessory Weight: 23 lbs.)
Contact Nargesa USA
(A Quantum Machinery Group Division)
Quantum Machinery’s Showroom:
7110 Expo Drive, Suite D
Charlotte, North Carolina 28269
Phone:
(704)703-9400
Email: Sales@QuantumMachinery.com
(704)703-9400
Email: Sales@QuantumMachinery.com
For all Machinery Inquiries and Questions, fill out the form below, and one of our Nargesa Specialists will be in contact with you shortly.
Thanks!
This field is required
This field is required
This field is required
This field is required
This field is required