WATCH THE VIDEO TO SEE EXACTLY HOW THE NARGESA MC400 ROLL BENDER WORKS ALONG WITH SOME OF IT’S FEATURES
The NARGESA MC400 Section and pipe bending Roll Bender. Our pipe bender MC400 is designed to minimize the manufacturing cost and provide maximum performance when bending pipes and profiles. It has been manufactured for different profiles such as flat bar or bar section, T-profile, rolling U-profile, bending angle, bending solid rod, both square and round types, spiral tube or even to perform square, rectangular or round pipe in different materials: iron, carbon steel, stainless steel, brass, copper, aluminum. The purpose of these bending operations varies from making greenhouses, tables, chairs, car guards, doors, windows, railings, fences up to countless metal products.
All Nargesa products are manufactured in our facilities in Spain. Hydraulic and electrical components are completely standard and from the the best leading European trademarks which have technical support all around the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
THE MC400 BENDING CAPACITIES
- Round Tube: 2.5" x .120" with a Minimum Radius of 18" Inches
- Square Tube: 2" x 2" x .120" with a Minimum Radius of 24" Inches
- Angle (Leg-Out): 1.5" with a Minimum Radius of 8" Inches
- Flat Bar (Easy Way): 3.15" x 0.75" with a Minimum Radius of 6" Inches
- Flat Bar (Hard Way): 2.25" x 0.39" with a Minimum Radius of 10" Inches
- Solid Round: 1.15" with a Minimum Radius of 6" Inches
- Solid Square: 1.15" x 1.15" with a Minimum Radius of 6" Inches
- C-Channel (Easy Way): 2.25" with a Minimum Radius of 9" Inches
- C-Channel (Hard Way): 2.25" with a Minimum Radius of 9" Inches
- T-Channel (Easy Way): 1.5" x 1.5" with a Minimum Radius of 6" Inches
THE MC200H
BENDING CAPACITIES
- Round Tube: 2.5" x .120"
with a Minimum Radius of 18" Inches - Square Tube: 2" x 2" x .120"
with a Minimum Radius of 24" Inches - Angle (Leg-Out): 1.5"
with a Minimum Radius of 8" Inches - Flat Bar (Easy Way): 3.15" x 0.75"
with a Minimum Radius of 6" Inches - Flat Bar (Hard Way): 2.25" x 0.39"
with a Minimum Radius of 10" Inches - Solid Round: 1.15"
with a Minimum Radius of 6" Inches - Solid Square: 1.15" x 1.15"
with a Minimum Radius of 6" Inches - C-Channel (Easy Way): 2.25"
with a Minimum Radius of 9" Inches - C-Channel (Hard Way): 2.25"
with a Minimum Radius of 9" Inches - T-Channel (Easy Way): 1.5" x 1.5"
with a Minimum Radius of 6" Inches
*Please Note - Minimum Radii shown may require multi-pass. The sizes shown above are the maximum capacity with minimum radii. Round Profiles and Special Profiles shown above will require dedicated tooling. When bending smaller sections, the machine will be able to bend very small radii.*
STANDARD TOOLING CONFIGURATION:
The Nargesa MC400 Roll Bender is equipped with 9 standard pieces, by means of which the user can work all kinds of profiles. Square, Rectangular Tube, Square Bars, C-Channel, T-Channel, Angle, Flat Bar, and Edged Flat Bar. Adjustable rollers, by washers with the size of profile which allows us to make bending to different profile sizes.
When the user has to bend any kind of profile at radius wider than 2 m or if there are height problems in the facilities, it is really uncomfortable to work vertically. It will be enough with just bending the machine down so the bending operation is made horizontally with the help of a support or stands where we place the piece in order to obtain an acceptable job. For instance, when you need to bend arches for a greenhouse, this is where it would be beneficial to order your MC400 in the other position. The MC400 is not capable of switching positions, it must be ordered this way.
TECHNICAL SPECS AND FEATURES
- Rollers Speed: 7 RPM
- Number of Drive Rollers: 3 Drive Rollers
- Diameter of Axes: 1.5" / 40mm
- Useful Axes Length: 3.15" / 80mm
- Motor Power: 1.1 KW / 1.5 HP
- Dimensions: 26"L x 30"W x 50"H
- Approx. Machine Weight: 800 lbs.
- Millimeter scale for bending in the upper shaft.
- Maximum Capacity for Bending Round Tube: 2.5" inches or 63.5 mm
-
Manufacturer's Warranty: 3 Years on All Parts
(Fulfilled by Quantum Machinery Group.)
- Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
- Correction rollers on the sides to control the bending deformation when making spirals and spiral staircases.
- Bending regulation by the upper shaft, which allows to curve tube and profile dimensions and profiles of large diameter without deformation.
- Secure transmission by using flat hardened pinions.
- Base cupboard for rollers and accessories.
- The MC400 can be brought in to be used in either the Vertical Position, or Horizontal Position. (MUST SPECIFY WITH ORDER.) The MC400 can be used in either the vertical or horizontal position. Horizontal table is ideal for big diameter jobs or facilities with heightshortage. 90% of our customers use our vertical MC400. Whenever the place allows it it is more advisable to work in the vertical mode since it is more comfortable for the operator. (Must tell Sales Engineer which style you'd prefer, as it must be specially made if you would like it in the horizontal position.)
TECHNICAL SPECS
AND FEATURES
- Rollers Speed: 7 RPM
- Diameter of Axes: 1.5" / 40mm
- Useful Axes Length: 3.15" / 80mm
- Motor Power: 1.1 KW / 1.5 HP
- Dimensions: 26"L x 30"W x 50"H
- Approx. Machine Weight: 800 lbs.
- Millimeter scale for bending in the upper shaft.
- Maximum Capacity for Bending Round Tube: 2.5" inches or 63.5 mm
- Two working positions, horizontal and vertical in the same workbench.
- Two drive rollers. The two lower rollers are motorized and knurled for better grip.
-
Manufacturer's Warranty: 3 Years on All Parts
(Fulfilled by Quantum Machinery Group.) - Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
- Correction rollers on the sides to control the bending deformation when making spirals and spiral staircases.
- Bending regulation by the upper shaft, which allows to curve tube and profile dimensions and profiles of large diameter without deformation.
- Secure transmission by using flat hardened pinions.
- Base cupboard for rollers and accessories.
Contact Nargesa USA
(A Quantum Machinery Group Division)
Quantum Machinery’s Showroom:
7110 Expo Drive, Suite D
Charlotte, North Carolina 28269
Phone:
(704)703-9400
Email: Sales@QuantumMachinery.com
(704)703-9400
Email: Sales@QuantumMachinery.com
For all Machinery Inquiries and Questions, fill out the form below, and one of our Nargesa Specialists will be in contact with you shortly.
Thanks!
This field is required
This field is required
This field is required
This field is required
This field is required