CC60CNC: Non-Mandrel Rotary Bender (Bend up to 2" Pipe)

Robustness and Speed
The weight of the machine in comparison to other brands provides an idea of how it’s built. Some of our units are almost double in weight than our competitors. These are not DIY machines; they’re pipe benders that can work 24 hours a day. Made of robust materials, which are tempered in areas subject to wear, and activated with a helical-cut pinion planetary gear system. The rotation speed is also something to be taken into account. It can reach 4.5 RPM for more aggressive production; in many cases, more than twice as much when compared to similar machines in today’s market.

4.0 Technology
The advantages of having this technology in a machine are endless, so we’re only going to mention the most relevant. Whenever a customer agrees, the manufacturer may remotely connect to their machine to do any software updates completely free of cost and detect any anomalies in the machine without needing to travel to the machine site. Customers are notified when preventive maintenance must be done on the machine along with many other advantageous features.

Curve Thicknesses and Finishes
Most tube & pipe benders can only bend very thick-walled pipes with a 10% minimum thickness of the diameter of the pipe normally calculated. For example, a good curve on a 40 mm pipe is usually guaranteed with a 0.13" / 3.5mm or 0.15" / 4mm wall thickness. The original counter-shape designed by Nargesa guarantees a good finish even with a thin-walled pipe. The minimum thickness for a 1.5" / 40mm pipe can be 0.060" / 1.5mm or 0.080" / 2mm. This significantly lowers raw material cost.

Offset Head and Two-Directional Bending
The offset head design allows for complex curves as the pipe goes underneath the head. Bending pipe below the head is not possible with some pipe bender models. The all-new CC60CNC and CC90CNC benders can curve to the right and left without needing to rotate the die, meaning any piece can be bent regardless its complexity.

Enhanced Energy Effeciency
The CC60CNC elbow bender can be connected to 110 V or 220 V single phase voltage so it can be taken to a worksite, if necessary, and be connected to a simple outlet. The consumption per machine working stroke has been significantly reduced to save energy. Only 1.1 Kw with a working stroke of up to 2.37" / 60.3mm.

Automatic Unlocking
The bending carriage moves automatically to the right or to the left depending on the direction of the curve to more easily release the piece without needing to re-adjust the grip. This original system can complete pieces in much less time.

Reinforcement Tool Post Support Included
The CC60CNC pipe bender comes standard with a reinforcement arm. It’s used to prevent machine chassis deformations. The Control indicates when this device is required or not required.

Bend 8 Lubricant (Optional)
With the purchase of the CC60CNC pipe bender, you’ll receive a 400 ml bottle of special bending lubricant: for a better finish on the outside of the curve, to prevent roughness and inner corrugation and reduce wear on the counter-shape die. Lubricates to reduce friction. Prevents and dissolves corrosion. Polishes and protects.

The CC Series ESA S625 Control Panel
Nargesa tube and pipes benders are controlled with a very intuitive and easy-to-use 7” color touchscreen with the latest 4.0 technology. Just enter the pipe dimensions, thickness, angle of the curve or curves and choose a die from the library and the control programs the rest of the parameters automatically; elastic recovery correction (springback), recommended rotation speed, whether a tool post support is necessary or not, and if the intended curve is possible... All of this may be modified by the end user based on their own needs. These are some of the most relevant features of this control system.