PP200CNC: 20 Ton Horizontal Press Brake

• Working Strength: 20 Tons / 20,000kg / 200kN
• Working Speed: 0.39” (9.8mm) Per Second
• Return Speed: 1.37” (35mm) Per Second
• Tooling Support Table: 23.6” x 46” (600x1,170mm)
• Max. Displacement: 9.8” (250mm)
• Motor Power: 3 HP / 2.2 kW
• Machine Weight: 1,467 lbs. (665kg.)
• Machine Dimensions: 38” x 47” x 45” (660 x 1,180 x 1,130mm)
• Warranty: 3 Years (On any defective parts.)
• Extremely Fast Tooling Changeover: 30 Seconds Max.
• Tooling Included?: Yes
• Tank Capacity: 27 Liters
• Hydraulic Pump: 7.5 Liters Per Minute
• What Tooling is Included?: A Folding Die at 3.93” & 4-Way V-Die
• Voltages Available: 220 Volt / 3 Phase, 480 Volt / 3 Phase, 220 Volt / 1 Phase
• Easy handling: The machine is sent completely assembled, it is only necessary to connect it to the required power supply and start performing.
• Versatility: The Nargesa PP200CNC has a catalog with a great deal of optional tooling.
• Easy fabrication of tooling: The customer himself or any toolmaker can manufacture dies and punches.

• Folding flat bars and sheets into completely close shapes. Conception of this horizontal bending press brake allows to make folding operations that are impossible to be carried out on a conventional press brake.
• Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.
• Fast tool change, punches and dies: This change does not take more than 30 seconds most of the times.
• STANDARD EQUIPMENT PROVIDED WITH THE MACHINE: Horizontal press brake PP200CNC includes the complete 4V’s folding die.
• Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.
• Folding flat bars and sheets into completely close shapes. Conception of this horizontal bending press brake allows to make folding operations impossible to be carried out on a conventional press brake.
• Fast tool change, punches and dies: This change does not take more than 30 seconds most of the times.
• A set of punch and folding die is supplied along with the machine.
• Performance by a safety double activation hold pedal.
• Low noise level, improving the quality of work of the operator.
• The machine is shipped completely assembled and ready to work.
• Palletized lower bench to easily transport the machine up to its working or storage site.
• Dies support shelf included.
• Lateral stop to place it right or left.
• All our products are manufactured in our facilities in Spain. Hydraulic and electrical components are all standard from the best leading European trademarks with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato...

SAMPLES OF JOBS DONE WITH THE PP200CNC

• Cutting, Piercing and Punching Flat Bars, or Sheet Metal, turn this Horizontal Bending Press into a Punching & Shearing Machine.
• The PP200CNC is capable of Bending Pipe at a fixed radius of up to 150°.
• This machine is capable of End Forming Tubes by Stretching and Reducing the tube ends; allowing the tubes to fit over each other or to weld together later.
• The PP200CNC is also a solution to bend different profiles at different radii while keeping the ends straight. An example of this would be for when you are manufacturing handles and flanges.
• Utilizing the power of the PP200CNC, this unit Cold Forges applications to make and form different shapes of balusters.
• The capability of Tube notching to assemble at 90°.
• Folding operations with wrought iron machines permit to completely bend the parts or pieces - unlike conventional flat bar section bending machines.

ESA S652 CONTROL PANEL

• Our Control Stores up to 10,000 programs.
• Up to 50 different angles on the same piece can be programmed at a time.
• Dimensions may be programmed in inches or millimeters.
• A library of available dies with the possibility of programming new ones.
• Library of materials and thicknesses available with the possibility of programming new options.
• The CNC can be supplied in more than 20 different languages.
• 9.8mm/s working speed and 35mm/s reversing speed.
• Manual or automatic operation.
• Automatic elastic recovery correction (springback).
• Can be remotely connected by the manufacturer without having to travel to the machine site.
• Automatic control of the angle to fold, in degrees.
• 7” Color Touch-Screen with 800 x 480 Resolution.
• Manual or automatic operation.
• Integrated Piece Counter.
• 4.0 Technology.
• On-screen alarm diagnostics.
• Preventive maintenance warning.
• 128 MB silicon disk. 2 analogue inputs, 12 bit resolution. 1 RS232 serial port. 24 Vdc power source. 1 USB port. 1 Ethernet port. 16 digital inputs (24 Vdc). 16 digital outputs (24 Vcc, 0.7 A max.) Protected against overloads and short circuits. 1 CAN port with 9 D-Sub F connector contacts.

A MAJOR ADVANTAGE OF THE PP200CNC IS TO HAVE A REALLY SIMPLE, NON-COMPLEX HEAD DRIVE. THAT WAY, ALL CUSTOMERS CAN ADAPT ANY DIE MANUFACTURED BY THEMSELVES.

To add more options when fastening tools, the workbench has a series of clamping holes distributed throughout the area to ease up the fixing. If you need a special die, Quantum Machinery Group offers technical support to all our customers who wish to make their own tools. Moreover, we have an extra service for designing and manufacturing exclusive tooling on request, for each of the machines Nargesa manufactures.

MONOBLOCK HYDRAULIC SYSTEM

Monoblock hydraulic power unit with positioning and pressure regulation valves. The hydraulic system can be regulated by means of pressure adjustment valves that affect the piston force. Pressure regulator with pressure gauge that allows to control the force carried out at any time.

FULLY GUIDED HYDRAULIC CYLINDER

The hydraulic cylinder placed on the work bench allows us to transfer all the force directly on the tools. Fully guided hydraulic piston to prevent any bending during the folding operation.

CYLINDRICAL FASTENING BOLTS

Cylindrical fastening bolts easy to install, to guarantee maximum firmness to the tools during machining operations. Plugs to prevent the residues of the folding from entering inside the machine.

A WORK TABLE WITHOUT THE FRAME

The work bench is frameless, this is great for the movement of the parts to be machined for there isn’t any element that obstructs its movement. The table is manufactured in a 60mm monoblock of welded steel, stabilized and machined. The operator’s working position must be at the side of the machine for accomplishing a better vision and control, as well as greater safety for the user since he will be outside the radius of action of the tools.

THE ALL-NEW ECO MODE OF THE LATEST NARGESA PRODUCTS SAVES ENERGY AND CONTRIBUTES TO THE CONSERVATION OF THE ENVIRONMENT

Nowadays, we know the remarkable importance of saving energy. This is the main reason why our new machinery incorporates an “ECO mode” that automatically disconnects the electrical parts that generate greater energy consumption if a period of inactivity is detected. Thus, when it is necessary to restart the operation, all you have to do is press the pedal to continue working.

We strongly believe that this feature is a core point both for the savings of our clients and for the sustainability of our planet, since we are a company very committed to the environment.

• V 16: Sheet from 0.039” to 0.0118” (1 to 3mm)
• V 22: Sheet from 0.078” to 0.15” (2 to 4mm)
• V 35: Sheet from 0.118” to 0.23” (3 to 6mm)
• V 50: Sheet from 0.157” to 0.315” (4 to 8mm)
• MAX. FOLDING LENGTH: 3.93” (100mm)
• MAX. FOLDING THICKNESS: 0.315” (8mm)

Dimensions for the PP200 Horizontal Press:

• 47.2” Wide
• 37.7” Long (with Bar Stop)
• 25.6” Long (without Bar Stop)
• 44.3” High (from Bottom to Top)
• 37.3” High (from Bottom to Table Top)

DIMENSIONS FOR THE PP200 HORIZONTAL PRESS:

• 46.45” Wide
• 41.33" Long (with Bar Stop)
• 25.98” Long (without Bar Stop)
• 44.48” High (from Bottom to Top)
• 37.3” High (from Bottom to Table Top)